What you need:
1. Iboot
8. Remove iboot CD and insert Iatkos Dvd into Drive
9. After Inserting DVD press F5 to refresh
10. you will get Iatkos S3 V2 disk same as like above iboot picture....
11. select iatkos s3 v2 and type " -v " (without quotes)
12. Press Enter
13. It takes several minutes to load...like this: (if any errors noticed in screen...leave it )
14. after completing above process you can get screen like below :
1. Iboot
2.Iatkos S3 V2
You Must Do:
1.Burn dvd with Transmac Only
2.Burn Dvd with Lowest Speed
(1x,2x,4x)
Installation Process:
1. Burn Iboot into the Cd
2. Burn iatkos into Dvd (as abow)
3. Insert iboot cd & restart your pc
4. Enter into BIOS settings ( By pressing F2 for most devices)
5. Change the first boot priority to CD/DVD & second boot priority to Harddisk
6. Press F10 and Save settings & Reboot your PC
7. You will get screen something like this below :
9. After Inserting DVD press F5 to refresh
10. you will get Iatkos S3 V2 disk same as like above iboot picture....
11. select iatkos s3 v2 and type " -v " (without quotes)
12. Press Enter
13. It takes several minutes to load...like this: (if any errors noticed in screen...leave it )
14. after completing above process you can get screen like below :
15. choose Preferred language.... click next...you will get like this...
16. next you get agreement screen, click next..you'll get like below :
17. here we go the important steps from here..if you get something like below:
18. Do this......click on "Utilities" menu & select "disk utilities"..you will get like this : do as like below
Note: All the data in the hard disk will be erased.... So that Only select the partition on left side then do like below select .....
19. you will get like this now :
20. Here another important step is "Customize" Options.....
21. click Customize you will get like below :
22. Select As same as below for Clean installation
You can select some other options at your risk
22. Click "Install".....it will take several minutes to complete.... wait until you get like this...
23. Restart your system you will get intro video ...
24. That's It you have Installed Macintosh on Your Loving PC...
25. You may get some errors....post a comment... any Error can solvable....Thank You
i tried till step 13 after that my laptop just struck and cannot go any further
ReplyDeleteThis Causes because of two reasons :
ReplyDeleteReason 1: may be you haven't burn disk with Transmac Software (note: you must choose high wile burning in transmac)
transmac burning tutorial : http://www.youtube.com/watch?v=MzU-1kWuA7M
Reason 2 : Busratio not supported
use this command : " -v cpus=1 busratio=22 " or " -v busratio=22 " (without quotes)
Busratios depends on processors. may you will find your processor here : http://3rr0rists.net/macintosh/busratio-for-i3-i5-and-i7-processors.html
(if not use default 22 as busratio)
Thank you
when i boot mac it stuck in the apple logo .why when i boot it , it stuck in the apple logo when the installation is finnished ?
ReplyDeletewhen i boot into my mac the internet isnt working and i carnt change my resolution plz help
ReplyDeleteI start the computer its in the boot screen where the apple appears then randomly the computer shuts off... Help?!
ReplyDeletepueden subir otra vez los enlaces me gustaria tener un cd live de mac gracias de antemano
ReplyDeleteI got iAtkos S3 V2 installed on my HP Dc7600 Minit tower.
ReplyDeleteGot it updated to 10.6.7 (I always had problems with 10.6.8).
Got all the kexts installed and had working Audio, Video and Ethernet.
I connected a second drive and tried to use Carbon Copy Clone to make a bootable clone of the drive in case anything happened.
After the clone was made I tried to boot from it and what happens now is it gets to the grey Apple screen and hangs there.
I also tried to boot off the iAtkos DVD (my version of the DVD is bootable and I don't need iBoot) and it bypasses the DVD drive and gets to the chameleon boot screen then ejects the DVD and tries to reboot.
Any idea?